Dirt Town Guide • 2026-11-16Construction

Road Building Guide: Layers, Grade Limits and Bridges

Road layer specifications, grade limits, and bridge parameters in Dirt Town.

Published: 2026-11-16Author: Wiki Team

Players establish roads across the landscape by felling trees, moving rocks, digging ditches, and hauling gravel.

Rear view of yellow crawler dozer driving down a dirt path past boulders toward a stream crossing.
Rear view of yellow crawler dozer driving down a dirt path past boulders toward a stream crossing.

Road Types and Layer Specifications

  • A paved road requires a total thickness of 0.4 m with a density rating of 1.0.
  • The foundation consists of a 0.3 m base of Gravel topped by 0.1 m of Asphalt.
  • Each paved roadway includes an unpaved shoulder measuring 0.5 m in width with a shoulder density of 0.9.
  • An unpaved dirt road is formed from a single 0.25 m layer of compacted Roadmix.
  • Standard dirt roads specify a material density of 0.9 with a shoulder width of 0.0 m.
  • A dedicated rail bed requires a 0.4 m ballast foundation formed entirely from Gravel.
  • The railway ballast structure maintains a density target of 0.9 without shoulder extensions.
  • A standard walking path consists of a 0.1 m layer of Roadmix placed at 0.85 density.
  • A paved path combines a 0.1 m gravel sub-base with a 0.05 m asphalt surface layer.
  • This layered paved path reaches a total thickness of 0.15 m with a maximum surface density of 1.0.
Yellow wheel loader driving along a paved asphalt road curving through pine trees and green brush.
Yellow wheel loader driving along a paved asphalt road curving through pine trees and green brush.

Maximum Grade Limits and Slope Rules

  • The maximum road slope grade permitted in construction calculations is 8 percent.
  • While absolute steepness caps at 8 percent, standard mainline routes should target a nominal grade of 6 percent.
  • Drainage ditches along road borders are configured with a width of 4.8 m and a base depth of 0.6 m.
  • Roadside ditches have a maximum depth of 1.2 m.
  • Road verges are finished with a 0.3 m layer of topsoil packed to 0.6 density.
Yellow wheel loader driving along a crushed stone embankment beside a river with a dozer parked nearby.
Yellow wheel loader driving along a crushed stone embankment beside a river with a dozer parked nearby.

Bridge Specifications

  • Permanent bridge structures are specified with a concrete deck thickness of 0.6 m.
  • Bridge parameters define a grade of 4 percent.
  • Safety barriers along bridge edges measure 0.5 m in width with a barrier height of 0.8 m.
  • Underneath bridge decks, vertical headroom clearance is set at 4.5 m.
  • Structural bridge piers are 1.0 m thick and spaced at intervals of 12.0 m.

In this guide