Materials Guide
Physical properties, density, repose angles, and bearing capacity for materials in Dirt Town.
The dynamic terrain simulation in Dirt Town models soil mechanics across layered substrates, allowing material to be plowed, dug, and stacked anywhere on the site. The terrain models different materials layered on each other, noting that โSand is very different from clay in every way.โ
Material Physical Properties
| Material | Bulk density | Swell factor | Dry repose | Wet repose | Bearing capacity | Cut resistance |
|---|---|---|---|---|---|---|
| sand | 1600 kg/m3 | 15% | 34.0 deg | 22.0 deg | 200000 | 50000 |
| 1800 kg/m3 | 10% | 38.0 deg | 34.0 deg | 600000 | 270000 | |
| clay | 1600 kg/m3 | 25% | 50.0 deg | 28.0 deg | 400000 | 100000 |
| 2400 kg/m3 | 0% | 60.0 deg | - | 5000000 | 3000000 | |
| dirt | 1600 kg/m3 | 25% | 50.0 deg | 28.0 deg | 410000 | 100000 |
| rock | 2700 kg/m3 | 0% | 89.0 deg | - | 5000000 | 5000000 |
| 1900 kg/m3 | 12% | 38.0 deg | 32.0 deg | 450000 | 396000 | |
| 1300 kg/m3 | 30% | 45.0 deg | 30.0 deg | 250000 | 60000 |
See our road building guide.
Density and Swell Mechanics
Topsoil has a bulk density of 1300 kg/m3 and a swell factor of 30%. Rock has a bulk density of 2700 kg/m3 and a swell factor of 0%. Dirt has a bulk density of 1600 kg/m3 and a swell factor of 25%.
Angle of Repose and Slope Stability
Moisture in the simulation affects grip and dirt movement.
Dry sand stacks at a 34.0 deg slope but slumps to 22.0 deg under wet conditions. Clay has a dry repose angle of 50.0 deg and a wet repose angle of 28.0 deg. Gravel has a dry repose angle of 38.0 deg and a wet repose angle of 34.0 deg.
See our moving sand guide.
Bearing Capacity and Cut Resistance
Players crush gravel to improve roads on the site.
Roadmix has a bearing capacity of 450000 and a cut resistance of 396000.
Asphalt has a bearing capacity of 5000000 and a cut resistance of 3000000. Rock has a bearing capacity of 5000000 and a cut resistance of 5000000.
See our flower hill map tour.